<optgroup id="aapz5"></optgroup>

    <legend id="aapz5"></legend>

  • <span id="aapz5"><blockquote id="aapz5"></blockquote></span>

    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system

    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
    Name
    HDPE septic tank
    Material
    PE100
    Place of Origin
    China
    Size
    1.0,1.5,2.0,2.5 m3
    Colors
    black
    Service Life
    Over 50 years
    Payment items
    T/T L/C
    Port
    Qingdao
    Payment
    30% ADVANCE PAYMENT AND THE 70% BALANCE PAYMENT BEFORE THE SHIPEMNT
    Plastic septic tank is a basic facility for storing and treating sewage in our daily life. HAILI is processed with environmentally friendly plastic raw materials. The durability of the product can be as long as 50 years, which is longer than that of brick septic tank. many.

    HDPE-Septic-Tank_03.png

    Advantages and characteristics of plastic septic tanks:

    1. The double-layer thickening design of the plastic septic tank is not easy to leak.

    2. The product is simple to operate, easy to install, and requires no manual maintenance in the later stage.

    3. It occupies a small area and adopts the buried type, which does not occupy the space on the ground.

    4. The construction period is short, which can save the installation cost and labor cost for the enterprise.

    5. The price of the product is affordable, the economic performance is excellent, and the cost is lower than the traditional septic tank.

    6. The plastic septic tank can hold various chemical sewage and medical wastewater, and is resistant to various chemicals such as acid, alkali and salt.

    Plastic septic tanks are widely used:

    Plastic septic tanks have many product advantages and a wide range of applications, suitable for large factories, hospitals, schools, industrial parks and many other places.

    The plastic septic tank can ensure the sanitation of the living environment and avoid the pollution of the environment by sewage discharge. In the process of sewage purification, the product can not only discharge the sewage up to the standard, but also decompose the sludge and anaerobic decompose into organic sludge, which can be Used as fertilizer for crops.

    During the treatment process, the plastic septic tank can kill mosquitoes and fly eggs and reduce the harm caused by mosquitoes to the living environment.

    HDPE-Septic-Tank_02.png

    The simple use of plastic septic tanks:

    The plastic septic tank adopts blow molding, the production process is simple, and the manufacturer can produce it in large quantities in a short period of time.

    The product is light in texture, easy to transport, and has a short installation period. The construction personnel install it by lifting type. During the installation process, the company has technicians to guide the operation on site. After installation, the inspection can be put into use.

    The plastic septic tank does not need maintenance in the later stage, saving labor and material resources, and the product can be cleaned regularly after a period of use.


    Advantages of PE septic tanks

    The polyethylene PE plastic septic tank is made of high-strength polyethylene PE raw materials through rotational molding. It is formed in one time, without seams, with good overall sealing performance, non-toxic, odorless, non-polluting, acid and alkali resistance, corrosion resistance, Durable and economical, normal use can reach more than 50 years. The sewage treatment effect is good, and the brick septic tank is not suitable for acid and alkaline conditions and the leakage problem is eliminated.

    1.0 cubic meter PE septic water tank

    1.0septic-tank.jpg

    Usual number of people available: 3-5 peoples

    Wall Thickness: 4mm/5mm

    Caliber: 400*315*315mm

    Weight: 40.8 KG

    Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

    1.5 cubic meter PE septic water tank

    1.5septic-tank.jpg

    Usual number of people available: 6-8 peoples

    Wall Thickness: 4mm/5mm

    Caliber: 400*315*315mm

    Weight: 53-56 KG

    Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

    2.0 cubic meter PE septic water tank

    2.0septic-tank.jpg

    Usual number of people available: 13-15 peoples

    Wall Thickness: 7mm

    Measure: 2355*1210*1165mm

    Caliber: 400*315*315mm

    Weight: 93-96 KG

    Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

    2.5 cubic meter PE septic water tank

    2.5septic-tank.jpg

    Usual number of people available: 13-15 peoples

    Wall Thickness: 7mm

    Measure: 2760*1220*1200mm

    Caliber: 400*315*315mm

    Weight: 110 KG

    Shipping: Split shipping. The PE septic tanks produced by Haili are split, saving transportation costs, and can be assembled at the time of installation. Click the Chat button in the lower right corner to get the installation video.

    Composition of PE plastic septic tank

    The main function and function of the precipitation and decay area is to precipitate the domestic sewage to remove the coarse substances that can be precipitated in the wastewater. At the same time, the wastewater performs septic action here. Circulate the water, produce more microorganisms, decompose and devour the sewage. The filter treatment area, whose function is to further treat the sewage in this area. Converting COD in sewage into harmless inorganic substances is a key component of the device.

    tank-real-shot.jpg

    PE plastic septic tank installation instructions

    Excavate a rectangular pit according to the size of the septic tank, and use 50mm concrete as the cushion. Lay the three-compartment septic tank flat, connect the sliding manure pipe and the exhaust pipe, and the exhaust pipe should be 20-50cm higher than the toilet room. The backfill soil is preferably semi-dry and semi-wet, compacted layer by layer, and backfilled layer by layer until the ground is level to prevent the septic tank from collapsing and tilting. Filling should be carried out in two steps: backfill half to a depth of 0.6m, sprinkle a small amount of water to tamp and level, and then fill the soil again until the surface is level. The top two outlets are 5-10cm above the ground, and cement mortar is used around the outlet cover to play a role in impermeability and fixation. The installation should be parallel to the left and right, and the longitudinal direction should be high in the front and low in the back (5° inclination) to ensure that no water is left after flushing. The distance between the rear end and the wall should be between 20-25cm, and an external insulation layer should be added in cold areas. The surrounding area of the squatting pan is first tamped with fine sand, and then leveled with 2 cm cement mortar. The water outlet pipe of the water storage bucket must be installed naturally, and it is not suitable for S-shaped laying to prevent the water from freezing. The water storage bucket should be placed on the back side. When the indoor water storage bucket is installed, the bucket cover is 10cm below the ground, and the bucket cover can be covered with thermal insulation material. When backfilling the soil, the water storage bucket should be filled with water first, and then the soil should be compacted.

    HDPE-Septic-Tank_04.png


    No article.

    Send a Message

    If you want to ask anything just fill in the form below and send us.

    Name: Robert JImi        time:2022-08-29 10:52:17
    We are from the Philippines and we provide products and engineering services to municipalities. We purchase PE plastic septic tanks for a long time. haili is a PE factory and the plastic products provided are fantastic.

    Write a review

    // Our Pipe //

    Featured Pipe Products

    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system
    1.0,1.5,2.0,2.5 cubic meter PE septic water tank plastic drain system

    Plastic septic tank is a basic facility for storing and treating sewage in our daily life. HAILI is ...

    500,1000,2000 Gallon PE Plastic Septic tanks for sale
    500,1000,2000 Gallon PE Plastic Septic tanks for sale

    PE Plastic Septic tanks market potential is huge, if you buy 500,1000,2000 Gallon PE Plastic Septic ...

    Molded PE septic tanks factory supply
    Molded PE septic tanks factory supply

    We are professional manufacturer and supplier of molded PE septic tanks in China. We have our own fa...

    SMC molded plastic septic tank(FRP)for sale
    SMC molded plastic septic tank(FRP)for sale

    We supply SMC Molded plastic septic tanks(FRP)for customers all over the world. Our SMC septic tanks...

    // Our Pipe //

    New Fusion Machine

    Plumber butt fusion welding tools 2in' to 4in' machine price list
    Plumber butt fusion welding tools 2in' to 4in' machine price list

    The manual butt fusion welding machine is used to weld the inner and outer ends of galvanized pipes....

    Plastic pipe hot melt welding equipment 63-160mm for India
    Plastic pipe hot melt welding equipment 63-160mm for India

    The manual butt fusion welding machine is used to fuse two pieces of plastic pipes. It can weld seam...

    Manual butt fusion welding machine for sale 2-4inch
    Manual butt fusion welding machine for sale 2-4inch

    The PE Butt Fusion Machine is an advanced electric butt welding machine with manually driven head wh...

    Automatic butt fusion hot melt machine for Arabia
    Automatic butt fusion hot melt machine for Arabia

    The butt fusion machine 630-800mm is a powerful welding equipment designed to weld and braze pipes, ...

    // Our Pipe //

    New Pipe Products

    PE100 electrofusion joint for water pipe fittings
    PE100 electrofusion joint for water pipe fittings

    The installation of electrofusion elbow pipe fittings can be generally divided into four steps, name...

    HDPE electrofusion coupling pipe fittings China manufacture
    HDPE electrofusion coupling pipe fittings China manufacture

    HDPE electrofusion pipe fittings refer to a kind of high-density polyethylene pipe fittings that can...

    Plumber butt fusion welding tools 2in' to 4in' machine price list
    Plumber butt fusion welding tools 2in' to 4in' machine price list

    The manual butt fusion welding machine is used to weld the inner and outer ends of galvanized pipes....

    Plastic pipe hot melt welding equipment 63-160mm for India
    Plastic pipe hot melt welding equipment 63-160mm for India

    The manual butt fusion welding machine is used to fuse two pieces of plastic pipes. It can weld seam...

    国产精品自在线拍国产|国产精品自在线拍国产手机版,又黄又色又免费的视频汤姆影院,无码av不卡亚洲成av人片
    <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>